Плагин NCAM для dreambox, GI S 8120 HD

[avts]

Ncam 7.9 compiled and patched by marouan & RAED

-[dvbapi + streamserver] Added future audio stream types for ATSC (currently not activated)
-[streamserver] Separate PAT and PMT searching from PowerVu descrambling
-[streamserver] Added 'Caid' setting in the stream relay configuration
(From now on the stream relay accepts a caid setting via the webif. The relay will be enabled only for the caid(s) specified.
Channels with caids other than those specified in this setting will be descrambled via the dvb-api.
An empty setting means the stream relay will be not used at all.)
-(This unconventional encryption system (data are XOR-ed with a dynamic key) works only via the Stream Relay option.
Refer to the wiki for more information on how to configure OSCam-Emu for use with Compel.)

[avts]

WORKING NCAM POWERVU CONFIGS

[avts]

Ncam : 8.0

Enigma2
opkg install -force-overwrite /tmp/*.ipk
DreamOS
dpkg -i --force-overwrite /tmp/*.deb

Ncam-Images-MIPS-IPK.zip/file
NCam-Images-OSDreambox-DEB.zip/file
ncam.mips.zip/file
ncam.sh4.zip/file
ncam.cortexa9hf-vfp-neon.zip/file

[avts]

Ncam : 8.1

Для установки:
Enigma2
opkg install -force-overwrite /tmp/*.ipk
DreamOS
dpkg -i --force-overwrite /tmp/*.deb

-Fix 1x fallthrough / break
-fix for NDS Standard cards
-Videoguard2 cleanup
-[streamserver] Added Rosscrypt1 support
-Add RossCrypt1 as supported caid
(This is not a functional change, as it works without this also. This is needed just to stop the 'decoding is waiting for matching readers' message in the livelog)
-Add Support (aarch64)

NCam-Images-OSDreambox-DEB
Ncam-Images-MIPS-IPK
(build-mips (Gigablue-Dream-VU+-Xtrend-Formuler)
(build-sh4 (Golden Media-Galaxy innovations-Amiko)
(cortexa9hf-vfp-neon-ARM (DreamoxUHD + VU+4K + Routers Mipsel DD-WRT)
(aarch64-ARM (VU+4K Duo4K + osmio4k)
(build-x86-Linux-pc (32bit-i686)
(build-x86-Linux-pc (64bit)

[avts]

Ncam V 8.2

enigma2-plugin-softcams-ncam-mips_V8.2-r0_all.ipk.zip

enigma2-plugin-softcams-ncam-osdreambox_V8.2-r0.deb.zip

-[dvbapi] Limit the number of streams descrambled on extended cw (Descrambling is now limited to 4 audio streams (there are no more than 4 audio streams in powervu channels anyway) and disabled completely for data/subtitle streams as there appear to be un
-encrypted in every powervu channel. This saves CA indices and allows for more channels to be descrambled simultaneously (e.g. when doing recordings))
-[dvbapi] Stream type identification defaults to 'audio' now (On some powervu channels starting a recording resulted in audio not being descrambled. This is a quick fix, until a better solution is found)
-fix Nagra & Nagra Merlin Tier Expire Dates
-Nagra EMM Filter merged
-completeness check of the required CAK7 keys
-aescbc removed

[avts]

Ncam 8.8 compiled and patched by marouan & RAED
-Improvements emu
-clean implementation of the card list
-(rarely used modules are set from default on to default off (no codechange just setup switch))
-fix reset to wrong defaults
-[nemu] Changed function declaration to a more clean way
-[streamserver] Improved Compel algorithm
(Picture is more stable now with minimum glitches only at key change (every ~53 seconds). The teletext pid is also descrambled now)

Ncam.config Files
16.02.2019

8.8-ncam.aarch64.zip

8.8-ncam.cortexa9hf-vfp-neon.zip

8.8-ncam.mips.zip

8.8-Ncam-Images-MIPS-IPK.zip

8.8-NCam-Images-OSDreambox-DEB.zip

Ncam Config files_16.02.2019.zip

[avts]

Ncam.config Files
18.02.2019 @fairman

config Files - 18-02-2019.rar

[avts]

fix some wrong code ..

config Files - 18-02-2019 (1).rar

[avts]

Ncam : 8.9

[spoil]Enigma2
opkg install -force-overwrite /tmp/*.ipk
DreamOS
dpkg -i --force-overwrite /tmp/*.deb[/spoil]

Ncam-Images-MIPS-IPK.zip

NCam-Images-OSDreambox-DEB.zip

[avts]

Ncam V 9.2

05-03-2019

-Improvement the emu

-Fixes detecte reader and file-keys of constant.cw

-[powervu] Added support for various hash modes (This includes hash modes 0, 0x0B, 0x0C, 0x0D, 0x0E and greater than 0x27)

enigma2-plugin-softcams-ncam-mips_V9.2-r0_all.ipk.zip

enigma2-plugin-softcams-ncam-osdreambox_V9.2-r0.deb.zip